The cracks in the asphalt road will not go away on its own. It will get worse over time, especially in cold climates where freezing temperatures exacerbate existing cracks, according to Reader’s Digest. Cracked asphalt covering with a patch repair is not difficult, but it can be a dirty job.
- Clean your way first by sweeping any debris. Since gas and oil weaken the asphalt, also you need to scrub your entry or asphalt before it can be patched.
- Squirt liquid detergent directly on any gas stains on your driveway asphalt. Then wet the soap lightly with water from a hose. Working long broom handle forward and backward on the spot to create a soapy emulsion gas. Rinse the soap off, and then repeat if necessary until it enters everything is clean.
- Expect the asphalt road to dry before filling cracks and holes big patch.
- Squirt liquid crack filler in small cracks of less than an inch wide. This substance hardens and prevents water from getting in the asphalt.
- Fill large cracks and holes with cold patch asphalt, using a small asphalt to work in the hole palette. It is a dry mixture can buy a building supply store. Pour an inch of asphalt cold patch into the hole, and then push it down, using a brick. Add one more and tamp inch, repeating the process until the entire hole or crack is filled with cold patch asphalt.
- Repeat step 5 until you have completed the repair patch of asphalt. To protect the asphalt of future harm may apply sealant. Natural Handyman recommends patch cure leave your job fall to winter, then close your asphalt driveway in the spring.
Tips & Warnings
- To seal the asphalt, pour the sealant into a long ribbon along the asphalt. Push the sealant forward and backward, using a squeegee, until his entrance was covered with sealant. Allow the area to dry at least 24 hours.